Suntec Pumps

Suntec Industries Incorporated was founded on April 19, 1984 by a purchase from Sundstrand Corporation of their Sundstrand Hydraulics Division. Sundstrand Hydraulics was formed as a unit of Sundstrand Corporation in 1934 to build high-pressure hydraulic pumps, motors, and valves for machine tools and oil burner pumps. The first oil burner pumps were built in 1931. Today, pumps are used for residential, commercial and industrial heating, as well as various other applications. Special models are built for gasoline and JP4 fuel used mainly on government applications. These models meet both temperature and application specifications and are used by the government for airplane ground heaters, portable shower bath units, and space heating. Gear sets from these small pumps are used for small hydraulic applications where a quiet operation, low cost, and reliability are required. Many of these are for dental and medical chairs and the internal gear type continues to meet these requirements. Fuel pumps remain the company’s primary product. Plants are located in Glasgow, Kentucky, and Dijon, France.

COMPANY INFORMATION

SUNTEC PUMPS
OIL PUMP SINGLE STAGE 3450 RPM

FEATURES

  • Fuels : Suitable for Kerosene, No. 1 or No. 2 Fuel Oil

  • RPM : 3450

  • Rotation : R. H.

  • Nozzle Port Location : R. H.

  • Strainer & Nozzle Rating at 100 psi : 2.5/0.4 gph

  • Special Features : Waste oil application

SUNTEC PUMPS

OIL PUMP SINGLE STAGE 1725 RPM

FEATURES

  • Fuels : Suitable for Kerosene, No. 1 or No. 2 Fuel Oil

  • RPM : 1725

  • Rotation : R. H.

  • Nozzle Port Location : R. H.

  • Strainer & Nozzle Rating at 100 psi : 2.5 gph

  • Special Features : Waste oil application

SUNTEC PUMPS
NON-CAPACITY TYPE SOLENOID PUMP KR

FEATURES

Solenoid pump designed to function even with large suction heads in oil

applications.

These pumps can lift up to 16L/h with a suction head of 1,8 m.

Max. pressure : 0,4 bars

Applications : used to transfer oil from a tank that is at a considerable distance

below the pump.

SUNTEC PUMPS
NON-CAPACITY TYPE SOLENOID PUMP VSE

FEATURES

Solenoid pump with pressure regulator for high pressure, large capacity oil applications. Special model to alleviate the problem of excessive noise level during the first start-up of the boiler.

Max. pressure : 17 bars – Max flow rate : 18 l/h (@220 V AC – 50 Hz).
Applications : gun-type burner with light oil for space heaters and water boilers.

SUNTEC PUMPS
NON-CAPACITY TYPE SOLENOID PUMP VSK

FEATURES

Solenoid pump with pressure regulator for high pressure, large capacity oil applications.

Max. pressure : 14 bars – Max flow rate : 24 l/h (@220 V AC – 50 Hz).

Applications : gun-type burner with kerosene, light oil, heating oil/biofuel blends for space heaters and water boilers.Pressurized lubricating systems with light oil.

SUNTEC PUMPS
NON-CAPACITY TYPE SOLENOID PUMP VSC

FEATURES

Solenoid pump with pressure regulation for high pressure oil applications.

Max. pressure : 18 bars – Max flow rate : 18 l/h (@220 V AC – 50 Hz).

Applications : gun-type burner with kerosene and light oil for space heaters and water boilers.

SUNTEC PUMPS
TV VALVE

FEATURES

A separate pressure regulator to suit T unit.

Pressure ranges : 2 – 10 / 7 – 40 bars.

SUNTEC PUMPS
HIGH CAPACITY OIL PUMP TYPE TA

FEATURES

This high technology fuel unit adapted for the rigours of industrial applications incorporates an integrated pressure regulator and a preheater location.

Pressure range : 40 bars max.

(except TA5 : 30 bars max)

Flow range @ 2850 rpm, 20 cSt, 20 bars :

500 – 1350 l/h.

SUNTEC PUMPS

HIGH CAPACITY OIL PUMP TYPE T

FEATURES

Same concept as the TA pump, with higher capacity. The pressure regulation is assured by the seperate TV valve.

Pressure range : 40 bars max.

(except T5 : 30 bars max)

Flow range @ 2850 rpm, 20 cSt, 20 bars :

1380 – 3900 l/h.

SUNTEC PUMPS

MEDIUM CAPACITY OIL PUMP TYPE J

FEATURES

Sought after traditional engineering, this unit for medium capacity light oil burners incorporates a combination pressure regulator and cut-off valve.

Viscosity range : 2 – 75 cSt.

Pressure ranges : 10 – 21/ 10 – 30 bars.

Flow range @ 2850 rpm, 5 cSt, 10 bars :

170 – 330 l/h.

SUNTEC PUMPS

MEDIUM CAPACITY OIL PUMP TYPE E

FEATURES

E pump is renowned throughout the world for medium capacity industrial heavy oil applications. E 1069 high temperature version with preheater location is specially designed for easier cold starting and improved longevity.

Pressure range : 14 – 30 bars.

Flow range @ 2850 rpm, 20 cSt, 20 bars :

170 – 360 l/h.

SUNTEC PUMPS
MEDIUM CAPACITY OIL PUMP TYPE D

FEATURES

This small unit can handle medium grade fuel oils. D pump incorporates an adjustable pressure regulator without cut-off.

Pressure range : 10 – 28 bars.

Flow range @ 2850 rpm, 20 cSt, 20 bars :

46 – 94 l/h.

SUNTEC PUMPS
MEDIUM CAPACITY OIL PUMP TYPE AJ

FEATURES

A compact medium capacity fuel unit for light oil, with adjustable pressure regulation.

Pressure ranges :

10 – 20 bars (regulator with cut-off function)

10 – 30 bars (regulator without cut-off function).

Flow range @ 2850 rpm, 5 cSt, 10 bars :

170 – 260 l/h.

SUNTEC PUMPS

SMALL CAPACITY OIL PUMP TYPE AT

FEATURES

Pump with two adjustable pressure ranges, one nozzle outlet and integral in-line solenoid cut-off (according to

DIN EN ISO 23553-1).

Pressure ranges :

low mode : 8 – 15 bars,

high mode : 12 – 25 bars.

Flow range @ 2850 rpm, 5 cSt, 10 bars :

46 – 130 l/h.

SUNTEC PUMPS
SMALL CAPACITY UNIVERSAL SERVICE PUMP TYPE AUV

FEATURES

This universal service pump is specially designed for the replacement market.

It replaces most AS47, ASV47, AL 35, ALV35 models for heating oil, B10 blend and kerosene applications.

Copyright © 2019 IC Mega International Group