Honeywell

COMPANY INFORMATION

Honeywell is a Fortune 100 company that invents and manufactures technologies to address tough challenges linked to global macrotrends such as safety, security, and energy. With approximately 132,000 employees worldwide, including more than 19,000 engineers and scientists, we have an unrelenting focus on quality, delivery, value, and technology in everything we make and do.

HONEYWELL

COMBUSTION CONTROLS

Ultraviolet, Minipeeper

SKU: C7035A1023

Overview

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

Features

  • Use with Honeywell Flame Safeguard primary safety controls and burners requiring ultraviolet flame detection.

  • Mounts on a 1 in. sighting pipe by using an integral collar.

  • Protects the sensing tube with a shield.

  • Meets outdoor rain tight requirements of Underwriters Laboratories Inc., NEMA 4 and NEMA 4X.

  • Wires in parallel for difficult sighting applications.

  • Seals against pressures as high as 5 psi (34.5 kPa) when correctly installed.

  • Field-replaceable ultraviolet sensing tube.

HONEYWELL
COMBUSTION CONTROLS
Two Rod Direct Spark Ignition Control
SKU: S87D1020

Features

  • Control ignition sequence and gas control operation.

  • Generate high voltage potential for main burner ignition.

  • Lockout after one trial for ignition if main burner fails to ignite.

  • Reset from thermostat after lockout.

  • Use modules (except S87C) with any combination gas control designed for direct spark applications and rated 2.0A or less.

HONEYWELL
COMBUSTION CONTROLS
Single Rod Direct Spark Ignition Control
SKU: S87B1008

Features

  • Control ignition sequence and gas control operation.

  • Generate high voltage potential for main burner ignition.

  • Lockout after one trial for ignition if main burner fails to ignite.

  • Reset from thermostat after lockout.

  • Use modules (except S87C) with any combination gas control designed for direct spark applications and rated 2.0A or less.

HONEYWELL

COMBUSTION CONTROLS

Purge Timer

SKU: ST7800A1021

Overview

Provides the prepurge timing for select 7800 SERIES relay modules. ST7800C used with the RM7838C only.

Product Specifications

  • Application: Purge Timer

  • Approvals, Underwriters Laboratories Inc.: Component Recognized, File No. MP268; Guide No. MCCZ2.

  • Approvals, Canadian Standards Association:Certified, File No. LR95329-3.

  • PrePurge: 10 seconds

  • Approvals, Factory Mutual: Approved: Report No. 2X0A1.AF.

HONEYWELL
COMBUSTION CONTROLS
Purge Timer 30 sec
SKU: ST7800A1039

Description

Provides the prepurge timing for select 7800 SERIES relay modules. ST7800C used with the RM7838C only.

HONEYWELL
COMBUSTION CONTROLS
Protectorelay® Oil Burner Control
SKU: R8184G1294

Features

  • Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat.

  • Solid state flame sensing circuit.

  • LED on terminal strip indicates system lockout.

  • Remote lockout indication available on some models.

  • Enclosed safety switch with external reset button.

  • Manual trip lever opens safety switch for system maintenance.

  • Mounts on standard 4 x 4 in. junction box; select models may be mounted directly on burner housing.

  • C554A Cadmium Sulfide Flame Detector and 24 Vac thermostat required.

HONEYWELL

COMBUSTION CONTROLS

Programmer Control

SKU: RM7840L1075

Product Description

Honeywell RM7840L1075 Programmer Control. Microprocessor-based integrated burner control for automatically fired gas, oil, coal or combination fuel single burner applications. Provides safety, functional capability and features beyond conventional controls.

  • Functions include automatic burner sequencing, flame supervision, system status indication, system or self-diagnostics and troubleshooting.

  • Access for external electrical voltage checks.

  • Application flexibility and communication interface capability.

  • Five LEDs provide sequence information.

  • Five function Run/Test Switch.

  • Interchangeable plug-in flame amplifiers.

  • Local or remote annunciation of RM7840 operation and fault information.

  • Nonvolatile memory retains history files and lockout status after loss of power.

  • Compatible with existing Honeywell flame detectors.

HONEYWELL
COMBUSTION CONTROLS
Pressuretrol Controller
SKU: L91B1050

Overview:

Modulating pressure operating control for regulation of liquid or air and other non-corrosive gases.

Features:

  • Use with steam, air, noncombustible gases, or other fluids non-corrosive to the brass or phos-bronze (300 psi models) bellows.

  • Do NOT use with combustible mediums or any medium chemically harmful to phos-bronze bellows (10-300 psi models) or brass bellows (all other pressure range models).

HONEYWELL
COMBUSTION CONTROLS
On-Off Primary Control
SKU: RM7890A1015

Features

  • Functions include automatic burner sequencing, flame supervision, system status indication, system or self diagnostics and troubleshooting.

  • Subbase and amplifier are required for operation.

  • Options include PC interface, keyboard display module, DATA CONTROLBUS™ MODULE, remote display module, first-out expanded annunciator, and COMBUSTION SYSTEM MANAGER™ software.

  • Five LEDs provide sequence information.

  • Interchangeable plug-in flame amplifiers.

  • Optional local or remote annunciation of operation and fault information.

  • Nonvolatile memory retains history files and sequencing status after power loss.

  • Optional remote reset capability.

  • Optional report generation.

  • Selectable relight or lockout on loss of flame.

HONEYWELL
COMBUSTION CONTROLS
Foot-Mounted Motor
SKU: M9174C1025

Product Description

Honeywell M9174C1025 Foot Mounted Actuator. Series 90 Modutrol IV™ motors non-spring return modulating proportional control motors used with controllers that provide a Series 90 output to operate dampers or valves.

  • Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.

  • Motor and circuitry operate from 24 Vac.

  • Quick-connect terminals are standard–screw terminal adapter is available.

  • Adapter bracket for matching shaft height of older motors is available.

  • Motors have field adjustable stroke (90 to 160 degrees).

  • Integral auxiliary switches are available factory mounted, or can be field added.

  • All models have dual shafts (slotted and tapped on both ends).

  • All models have auxiliary switch cams.

  • Fixed torque throughout the entire voltage range.

More Parts

Copyright © 2019 IC Mega International Group