Honeywell

COMPANY INFORMATION

Danfoss is a global company, present in a large number of countries with many different cultures. Because of this, it is vital that we deal actively with the challenges facing us where we operate. Danfoss wishes to play an active role in a sustainable global development where social responsibility and environmental and climate considerations go hand-in-hand with sound business development. We make it a priority that we not only respond to the circumstances which have an immediate effect on the company, but also consider the trends that outlines the challenges of the future. It is Danfoss’ overall target that the company is regarded in all matters as a responsible company that keeps its own house in good order.

DANFOSS
OIL NOZZLE TYPE KH

Oil nozzles type KH are designed for domestic high-pressure oil burners on the japaneese market operating with kerosene.

They are available with spray angle 60Æ, spray pattern H and sizes from 0.4 to 1.75 USgal/h. The nozzles are equipped with sintered bronze filters.

 

APPLICATION AND FEATURES

  • Kerosene

  • 100% test of capacity and performance

DANFOSS
OIL NOZZLE TYPE EH/ES

Oil nozzles type EH and ES are designed for domestic high-pressure oil burners operating with kerosene. They are available with 2 diff erent spray angles and sizes from 0.4 to 1.10 USgal/h.

The nozzles are equipped with sintered bronze filters. Our existing oil nozzles e.g. 60°S and 80°H can directly be replaced by our new 60°ES – 80°EH.

 

APPLICATION AND FEATURES

  • Kerosene

  • OFTEC certifi cation (OFS E100)

  • 100% test of capacity and performance

DANFOSS
OIL NOZZLE TYPE LN-LE

Oil nozzles LN-LE are special versions of Low NOx nozzles type LN with build-in cut-off valve. In combination with an oil pump with LE function ( e.g. BFP 21 LE ) the LN-LE nozzle prevents drop formation when preheating and from oil expansion in the nozzle line at burner stop. Alternatively the LE function can be obtained by using a preheater with incorporated LE valve ( FPHB-LE ) in combination with a Low NOx nozzle LN. Design LN-LE nozzles are available with 1 spray angle, 1 spray pattern and capacities from 0.45 to 1.00 USgal/h. The nozzles are equipped with sintered bronze fi lter.

 

APPLICATION AND FEATURES

  • Light oil

  • Low NOx, Low Emission

  • 100% test of capacity and performance

DANFOSS
OIL NOZZLE TYPE LN

APPLICATION AND FEATURES

Special nozzles for oil burners for light oil with preheating (low NOx burners).

DANFOSS
HUMIDIFYING NOZZLE TYPE B

APPLICATION

The Type B Humidifying nozzles were originally designed for use with power humidifiers to be sprayed into the duct work of home hot air furnaces as extra fine atomization and precise control of flow rates were required. These nozzles produce the finest possible atomization with direct water pressure operation.

Minimum operating pressure is 40 PSI but increasingly finer droplets result from higher operating pressure. Each nozzle is individually spray tested for accuracy of flow rate, spray angle and spray quality.

 

FEATURES

  • Residential duct humidification

  • Evaporation cooling

  • Humidification

  • Moistening

  • Misting

DANFOSS
OIL NOZZLE TYPE LE

Oil nozzles type LE are special versions of standard nozzles type OD with built-in cut-off valve. In combination with an oil pump with LE-function (e.g. BFP 21 LE) the LE nozzle prevents drop formation when preheating and from oil expansion in the nozzle line at burner stop.

Alternatively the LE-function can be obtained by using a preheater with incorporated LE-valve (FPHB-LE) in combination with an OD-nozzle.

 

APPLICATION AND FEATURES

  • Light oil

  • Low Emission

  • 100% test of capacity and performance

DANFOSS
OIL NOZZLE TYPES HFD/HD & SFD/SD

FEATURES

Danfoss has extended its well-known range of oil nozzles with a programme of simplex nozzles in stainless steel.

The steel nozzles from Danfoss are considered to be an attractive alternative to other nozzle makes with the same characteristics, shape and performance.

  • Fluidics HF -> Danfoss HFD

  • Fluidics SF -> Danfoss SFD

  • Fluidics H -> Danfoss HD

  • Fluidics S -> Danfoss SD

DANFOSS
OIL NOZZLE TYPES HR & SR

APPLICATION

Oil nozzles types HR and SR are designed for domestic high-pressure oil burners where round shaped nozzle head are requested. They are available with 3 different spray angles and sizes from 0.3 to 1.00 USgal/h.

HR and SR nozzles are equipped with sintered bronze filter and have the same performances as the corresponding sizes of OD-nozzles.

 

FEATURES

  • Light and heavy oil

  • EN nozzles from 1.46 to 3.72 kg/h

  • Standard nozzles 0.30 and 0.35 USgal/h

  • 100% test of capacity and performance in accordance with EN

DANFOSS
OIL NOZZLE TYPE OD
SKU: DNZ-OD

Oil nozzles type OD are designed for domestic and commercial high-pressure oil burners operating with light or heavy fuel. They are available with 4 diff erent spray angles, 3 spray patterns and sizes from 0.3 to 35.0 USgal/h.

As to construction and atomizing, the OD nozzle is the basic model for all Danfoss oil nozzles.

APPLICATION AND FEATURES

  • Light and heavy oil

  • EN nozzles from 1.46 to 6.55 kg/h

  • Standard nozzles from 0.30 to 35 USgal/h

  • 100% test of capacity and performance in accordance with EN

Copyright © 2019 IC Mega International Group